Jump to content

Talk:Bond (finance)

Page contents not supported in other languages.
From Wikipedia, the free encyclopedia

Government savings bonds versus regular bonds

[edit]

Government savings bonds, which have special features and are not normally marketable, are often confused with regular bonds. Government savings bonds tend to be cashable with the principal fully guaranteed by the issuer. These bonds are traditionally sold through banks. There are no coupons. Discounting is not meaningful because both the principal and accrued interest tend to be payable on demand under certain conditions. The bonds are often available at fixed or variable interest rates. The denominations tend to be small. A Canada Savings Bond may be purchased for as little as $100.

Although there are some exceptions, marketable bonds sold through dealers generally have fixed yields. What fluctuates is the market price, which changes the effective yield. A popular denomination is $1,000 although some dealers might have a higher minimum such as $5,000. — Preceding unsigned comment added by 64.228.105.121 (talk) 06:43, 18 August 2002 (UTC)[reply]

Is there a difference between the par value of a bond and its principal?

[edit]

Is there a difference between the par value of a bond and its principal? — Preceding unsigned comment added by 194.39.131.39 (talk) 19:42, 12 July 2004 (UTC)[reply]

To my knowledge, principal is usually not used to refer to a bond. This is probably because the price of bond change, varying redemption value exist for some bonds, and the outstanding balance (principal left unpaid) change in case of an amortized bond.
Par is the amount printed on the bond. Voidvector 00:33, 31 October 2004 (UTC)[reply]
Actually principal is often used to refer to the amortized amount. So if you have a bond that doesn't amortize, Par=Principal, the principal is always the same as the original face value of the bond. But for bonds that can be paid down: Par stays the same (original face value), principal can be paid down (current face value becomes lower than par). When you carry an amortizing bond (like a capitalized lease, or a car payment) on financial statements, you show it's current value as principal+interest owed. This is NOT the same as the present value of the bond which is (price*.01*principal)+accrued interest.
tristanreid — Preceding undated comment added 18:46, 29 December 2004 (UTC)[reply]

Spreads?

[edit]

Can anyone explain what exactly is meant by the phrase "spreads on corporate bonds"? MartinC — Preceding unsigned comment added by MartinC~enwiki (talkcontribs) 12:33, 19 May 2005 (UTC)[reply]

Sure, Martin. Here's an answer, then a more thorough explanation:
Brief answer-The spread is the yield on the corporate bond minus the yield on a similar treasury bond. Bond traders don't want to memorize or figure out what an appropriate yield would be when they trade corporate bonds or different maturities and coupons. It's much easier to just say how close the corporate bond is to a similar treasury bond. The difference between the two is called the spread, and is a measure of the credit risk associated with the corporation that issued the bond.
Longer explanation with the details spelled out-The prices of bonds are determined by how much people are willing to pay for them. The reason that not everyone just goes for the bond with the highest yield is that some bonds are more risky than others. Generally this trade-off gives a direct a risk/return relationship, the more risk on the bond, the more it has to yield for people to buy it, so the cheaper it will be to buy it. All bonds are sensitive to interest rates. So if you have a treasury bond you are mainly exposed to interest rate and reinvestment risk. Treasury bonds are generally considered the safest kind of bond, so there is no credit risk. If you invest in a corporate bond that has the same type of characteristics (maturity, coupon) of a treasury bond, you can assume it has the same amount of interest rate and reinvestment risk, plus some amount (a 'spread') of credit risk. :Tristanreid 16:04, 19 May 2005 (UTC)[reply]

Major changes to the entry

[edit]

I’ve made many amendments to this entry. In fact, I have almost rewritten two main paragraphs. Apart from the fact that certain parts were just wrong, vague or only US focussed, my main problem with this article is that it does not differentiate between what is important, and what are details. Certain discriptions, such as that of high yield bonds, were very long, and belong more in a specific entry. Also, all the information about asset backed securities, should not be given in a general bond entry.

Most of the ‘bond’ entry is still just a list of characteristics and classifications. I believe that these should be kept as brief as possible. Instead, more information should be given on how issuance and trading work, who the players are, what the risks are, etc.

I have not changed anything in the second half. Instead of the slightly confusing story that is there now, my suggestion would be to write paragraphs on:

  • Trading (market making, trading conventions, who are involved, etc.)
  • Investors (who buys bonds and why)
  • Credit rating (credit spreads, how do these correspond to the risk perception of investors)
  • Risks (interest rate risk, credit risk, liquidity risk, etc.)
  • Alternatives (instead of the ‘arguments against bonds’, which is slighly POV)

Please let me know what you think.

The page would also benefit greatly from more data – how much bonds were issued, per type etc. At the moment someone who does not know anything about bonds might get the impression that Perpetuals are as common as FRN’s.

In general, the fixed income pages are a bit of a mess (yes, bonds should fall under fixed income). It seems a lot of work to clean it up. Any suggestions?

Phew, my first update in Wikipedia and already such a long story… Apologies. — Preceding unsigned comment added by DocendoDiscimus (talkcontribs) 19:45, 9 September 2005 (UTC)[reply]

Payment In Kind Bonds

[edit]

What is the proper accounting for this security? — Preceding unsigned comment added by 12.25.49.1 (talk) 23:02, 11 January 2006 (UTC)[reply]

Hey, in the future, try to sign your questions. It's just a wikipedia etiquette thing, no big deal. You can automatically generate a sig by putting 4 tildes in a row. A tilde is the ~ symbol. So to answer your question: How do you mean account? A PIK is a bond where the coupons are paid in either cash or in more bonds (In Kind). If you're wondering how it looks on the financial statements, I'm pretty sure the balance sheet looks the same at first, and each in kind payment increments the marketable securities instead of cash. I don't think there's a difference on the income statement, it probably just goes under interest income, because marketable securities are cash equivalent anyway. Tristanreid 16:15, 13 January 2006 (UTC)[reply]
[edit]

— Preceding unsigned comment added by 68.125.55.209 (talk) 01:31, 4 March 2006 (UTC)[reply]

Proposed move

[edit]

I think people could be meaning a lot of things by the word "bond", so Bond (disambiguation) should be moved here and this article moved to Bond (finance). -- King of Hearts talk 04:00, 28 March 2006 (UTC)[reply]

If no one objects by Sunday, April 9, then I'll ask for the pages to be deleted and moved by an admin. -- King of Hearts talk 23:42, 3 April 2006 (UTC)[reply]

Disagree Debenture has a very specific meaning in the United Kingdom in relation to the issuing of debentures to finance arts and sports venues, and in terms of debenture holders (eg for Wimbledon, Wembley Stadium and the Royal Albert Hall) who get tickets and other privileges (the Google search for debenture ticket gets 85,000 results [1]). This meaning is simply not covered by Bond (finance), and I certainly wouldn't think of looking there for information about it. Humansdorpie 09:05, 28 April 2006 (UTC)[reply]

Debenture vs Bonds

[edit]

According to the Debenture page, govenments can issue debentures. Can anyone tell me whats the difference between a government issued bond and a government issued debenture? 203.173.143.182 20:13, 18 May 2006 (UTC)[reply]

Sure, but this goes to a further question that I was going to ask. According to a law school short textbook defintion, a bond as a general matter is a "secured" debt interest, while a debenture is not. Generally, "secured" means that the lender has recourse to some principal, realty, object, or "res" that he or she can claim an interest in, if not foreclose as in the classic case of realty mortgages or auto loans. How as a practical matter this works for a bondholder, beyond having a priority in the borrower's bankruptcy, is not clear to me.Tom Cod (talk) 06:08, 8 December 2008 (UTC)[reply]

Zero coupon

[edit]

"Zero coupon bonds do not pay any interest. They trade at a substantial discount from par. The bond holder receives the full principal amount as well as the accrued interest on the maturity date." If they don't pay any interest - what accrued interest ? -- Beardo 04:29, 12 June 2006 (UTC)[reply]

They don't pay interest, but they accrue value toward their principal amount. Any time prior to redemption, you can refer to the amount that has accrued thus far as 'accrued interest', or 'accretion value'. It's also not really industry standard to call the final date the 'maturity date'. It's usually called the 'redemption date'. I think referring to the maturity date in the article is an attempt to avoid confusing readers with too much dissimilar jargon, and it's not technically incorrect. I'm changing the article to say "The bond holder receives the full principal amount as well as value that has accrued on the redemption date." If you prefer a different phrasing, please have at it. Tristanreid 23:47, 12 June 2006 (UTC)[reply]
Redemption/Maturity date are interchangeable tho' "maturity date" is far more widely used. Note that you should never use the phrase "accrued interest" in the context of a zero coupon bond, there are subtle but important (to a bond trader anyway!) differences in considering a zero-coupon as a "zero coupon bond" or as a "single coupon paid at maturity" bond.
The theoretical price of a zero-coupon bond is the net present value of it's redemtion amount, there is no such concept of the "value that has accrued". — Preceding unsigned comment added by 194.203.201.92 (talk) 13:14, 13 March 2007 (UTC)[reply]

Convertible bonds

[edit]

Why aren't convertible bonds mentioned in this article? — Preceding unsigned comment added by 70.137.132.174 (talk) 23:47, 22 June 2006 (UTC)[reply]

I added convertible and exchangeable bonds -- Argyn — Preceding unsigned comment added by Argyn (talkcontribs) 18:50, 6 September 2006 (UTC)[reply]

See Also section fixes

[edit]

In the see also section the links to Baby Bonds, Bond Market in India, and Senior Bonds all take you to "article not found" pages in wikipedia. I would delete them myself but am new and not comfortable doing so. Can someone else either delete or fix them? Thanks! — Preceding unsigned comment added by 68.39.63.181 (talk) 21:37, 4 September 2006 (UTC)[reply]

Auction process and secondary market

[edit]

I don't see the description of auction process at both Treasury and the secondary markets. Technical details of bond trading are not covered yet. --Argyn — Preceding unsigned comment added by 198.204.133.208 (talk) 20:15, 6 September 2006 (UTC)[reply]

Removed discussion of US Treasury series bond issue dates

[edit]

This information was pretty tangential to the general topic of bonds, and was also taken verbatim from the Treasury bonds page. It also upset the flow of the paragraph into which it had been inserted. For these reasons, I removed it. Someone may be interested to note that the intro is still a little garbled - especially in its multiple definitions of the term "bill".

Joachim Heck 20:34, 7 November 2006 (UTC)[reply]

Possible error in second paragraph

[edit]

It says:

The issuer is equivalent to the borrower, the bond holder to the lender, and the coupon to the interest.

But the way I read it, the bond holder would be the borrower, and the issuer would be the lender. Isn't that right? Or have I misunderstood? Please delete this whole section when resolved either way. —Preceding unsigned comment added by Oidara (talkcontribs) 11:09, 19 December 2007 (UTC)[reply]

I believe it's clear. With the commas the way they are, it shows that
  • issuer == borrower
  • bond holder == lender
  • coupon == interest
and this is correct. When a company sells (issues) a bond, it is selling a promise to repay the amount borrowed along with interest. The company receives money from an investor, who now is a bond holder (and who "lent" money to the issuer). Does anyone else think this point should be clarified in the article? -FrankTobia (talk) 14:53, 19 December 2007 (UTC)[reply]

Tenor?

[edit]

Gee, it would be nice to know what "tenor" means in this context. Is it perchance anything like tenure?

The reason I ask is that I got here on a redirect when I tried to look up tenor upon seeing another article (Duration) use it with no definition and no link. So I find that this article contains zero uses of the word apart from the redirect note I get at the top.

OK, I'll Google it. But it would still be nice to find it here without plowing through every Domingo and Caruso on the WWW. Or, maybe I should just delete that disambiguation reference? Dandrake (talk) 05:17, 22 September 2008 (UTC)[reply]

I think Tenor should be added as a seperate article, they arent peculiar to Bonds. Being used in yield curves and Fx forward curves, swaps etc. The notations could use broken dates such as 20140711 or more genrally notations like 3Y, 1W, 3Y3M or even TN (Tomorrow Next) O\N (Overnight) SPOT. All of the non broken dates should really be interpreted relative to a calendar or for an FXrate a pair of calendars. While SPOT also needs to now the settlement period for the instrument eg T+3 instrument. Also you may need to consider exchange times SPOT of T+3 would be different at 15:00 when the market is open and at 21:00 when it is shut. — Preceding unsigned comment added by 141.228.106.147 (talk) 13:51, 11 July 2014 (UTC)[reply]

Price relevant only if sale considered

[edit]

It would be good to note that pricing a bond is not relevant if the holder plans to hold the bond until maturity. Sure the market price fluctuates but the value of the bond to the bondholder remains constant -- except for reinvestment rate risk. —Preceding unsigned comment added by 67.212.30.238 (talk) 03:45, 20 April 2009 (UTC)[reply]

However a significant drop in the price could indicate substantial credit risk and hence the risk that the bond may default prior to maturity. —Preceding unsigned comment added by 80.70.48.19 (talk) 09:40, 30 July 2009 (UTC)[reply]

Church bonds?

[edit]

Any thoughts about adding some information regarding Church bonds? Surv1v4l1st (Talk|Contribs) 01:34, 27 April 2009 (UTC)[reply]

Owes the holders a debt, or simply owes money?

[edit]

In the intro it says "the authorized issuer owes the holders a debt". Does this really mean that the issuer must at some future time give the holder a debt, such that at that time some third party would then owe the holder money? Or should this simply say "the authorized issuer owes the holders money"? In other contexts, redundancies like "cold temperature" aren't confusing, but in finance the above situation could easily occur, so the wording becomes critical. Thanks. 72.48.98.26 (talk) 05:42, 28 June 2009 (UTC)[reply]

MTN

[edit]

Could someone write some stuff regarding MTN's. — Preceding unsigned comment added by 213.173.163.2 (talk) 15:22, 16 October 2009 (UTC)[reply]

this is very big topic i cant tell now... — Preceding unsigned comment added by 121.58.175.8 (talk) 18:48, 14 December 2013 (UTC)[reply]

Fair Value

[edit]

Is the fair value of a bond the Dirty or the Clean price? — Preceding unsigned comment added by 213.173.163.2 (talk) 15:22, 16 October 2009 (UTC)[reply]

Fair Market Value is an equity definition. Debt has a well-known fair value called Present Value. The uncertainty lies in the Future Value which will be affected by changes in interest rates. --JergenJones (talk) 14:16, 8 October 2013 (UTC)[reply]

New section on History

[edit]

We need a new section of this article called 'History' or 'History of Bonds'. —Preceding unsigned comment added by 174.55.220.166 (talk) 00:25, 17 July 2010 (UTC)[reply]

UK market

[edit]

Complete newbie, failed to find any reference to the way 'bond' is used in the UK (and elsewhere?).

Man in street thinks of it as a term deposit with a bank or building society, not as a marketable security - although man with stockbroker knows it to mean something completely different.

Does this deserve pointing out somewhere, or have I just missed it? 86.150.248.58 (talk) 15:15, 15 January 2012 (UTC)[reply]

Bond and loan

[edit]

What is the difference between bond and loan ?

Siyac 06:17, 22 September 2012 (UTC) — Preceding unsigned comment added by Siyac (talkcontribs)

Misleading statement about government bonds?

[edit]

Second paragraph currently (30 Jan. 2013) states: "in the case of government bonds, to finance current expenditure".

But I believe government-issued bonds can be issued to for debt accrued from previous expenditures: bonds can cover both the current deficit and existing debt (accrued from previous deficits). The page on U.S. Treasuries explicitly discusses Treasury bonds issued in this context.

Proposed edit: "in the case of government bonds, to finance current expenditure and to cover previously accrued debts." — Preceding unsigned comment added by 50.131.141.62 (talk) 18:12, 30 January 2013 (UTC)[reply]

Retail Bonds

[edit]

I have read a lot of stuff about these new retail bonds, in the Financial Times and CFO insight for instance. I just added a short definition on this page, but I guess it would be interesting and probably content-rich to write a new page on wikipedia about retail bonds. If somebody feels like doing it, please let me know. — Preceding unsigned comment added by AggieKMA (talkcontribs) 13:10, 6 February 2013 (UTC)[reply]

Issuance

[edit]

On Mar 15th, th following was added: ″The bookrunner is listed first among all underwriters participating in the issuance in the tombstone ads commonly use to announce bonds to the public.″ The second half of the sentence seems a bit unclear, although it looks as if it's meant to express that ″ads are commonly used to announce ...″. Could this be re-phrased or corrected? 213.144.7.145 (talk) 13:50, 18 April 2013 (UTC)[reply]

Much of the writing in this section is not encyclopedic in tone. Use here of I and you does not conform to general wiki style. If there is no forthcoming comment, I will duly correct this within the month. Mashford42 (talk) 16:32, 15 April 2016 (UTC)[reply]

Priority

[edit]

I added a sentence in the intro about absolute priority. I believe the topic of repayment priority of creditors and shareholders should have its own page. There currently is only a page on Creditor's rights. — Preceding unsigned comment added by JergenJones (talkcontribs) 14:57, 8 October 2013 (UTC)[reply]

Subsection 3.2 Maturity: Text inconsistent with following list

[edit]

The last sentence ends with "... there are three categories of bond maturities:" but the following list has 4 items. Any explanation of this?

If not then I propose to replace three with four.

Nick the engineer (talk) 09:17, 22 March 2020 (UTC)[reply]

Nick the engineerGood point, but that sentence refers to the market for US Treasuries. Two authoritative sources make no mention of perpetual US Treasuries ("Handbook of Fixed Income Securities" and "Bond Markets, Analysis and Strategies," both by Frank Fabozzi.) So we need to 1) delete that last bullet point, or 2) delete the words "In the market for US Treasury securities." I favor #2, because at one time the UK government did issue perpetuals. Cordially, BuzzWeiser196 (talk) 12:34, 5 May 2021 (UTC)[reply]

Reverted edit by Ehrenkrater

[edit]

@Ehrenkrater: Greetings! I write to you today to explain why I reverted your edit to the yield to maturity language. It appears to me that your edit was aimed at making the language work for both YTM and redemption rate. Very well, but in doing so, you eliminated a key shortcoming of YTM: that it is based on a reinvestment rate assumption that in practice is unrealistic. This is a key point Liebowitz and Homer make in Inside the Yield Book. You also deleted my inline citation to a reliable source (Liebowitz and Homer). I'm a strong supporter of citations, and I'd hate to lose this one. It gives readers confidence that we're giving them info that's reliable and supported by experts. If you'd like to add a separate sentence that distinguishes the redemption yield from yield to maturity, perhaps that's a better way to do what I think you're trying to do here. Regards, BuzzWeiser196 (talk) 20:57, 5 December 2021 (UTC)[reply]

With due respect, that is complete rubbish.

First the practical position: As stated elsewhere in the article, at least in principle, institutions will invest to match their liabilities. They will attempt to match their assets and liabilities year by year, including both the interest receipts and the maturity proceeds. There is no reinvestment involved.

Second, the maths: the redemption yield (i) is defined so that the market value is equal to the sum of the future cash flows each discounted at rate i from the date of the cash flow back to the present. There is no reinvestment involved in this calculation.

Redemption yields are calculated by investors and quoted in the financial press because this is the most useful measure and the best way to compare different, but similar investment opportunities.

I agree that it might be possible to calculate a whole range of alternative measures using different formulae which allow in some way for reinvestment, but they are generally unhelpful, and it would be unnecessary and confusing to users if this is mentioned in the article.---Ehrenkater (talk) 22:18, 5 December 2021 (UTC)[reply]

@Ehrenkater: EDITED I wrote my last comment thinking that your redemption yield is different from yield to maturity. But your redemption yield formula seems to be a standard internal rate of return calculation, which is the same as yield to maturity for a bond. And I’ll have to disagree with your statement “there is no reinvestment”, for a couple of reasons. 1) First, the practical position: you make it sound as though institutional investors who practice asset/liability matching constitute the entire fixed income market. That is not the case. Some institutional investors (such as mutual funds and exchange-traded funds) and individual investors (like me) do reinvest coupon payments. That means they face reinvestment risk. Even those who practice asset/liability matching have to select bonds for their portfolios, and in that process, yield to maturity is a key metric used to compare bonds. 2) Second, the maths: true, the reinvestment risk issue isn't evident in your redemption yield formula. But it still exists. From Fabozzi's Bond Markets, Analysis and Strategies, page 44: "The investor will realize the yield to maturity at the time of purchase only if the bond is held to maturity and the coupon payments can be reinvested at the yield to maturity. The risk the investor faces is that future reinvestment rates will be less than the the yield to maturity at the time the bond is purchased. This risk is referred to as reinvestment risk." From Thau's The Bond Book, p. 58: "The actual return is likely to differ from the YTM, perhaps considerably, because the YTM will only be realized under certain conditions. Those conditions are: that you hold the bond to maturity; that the coupons are reinvested (rather than spent); that coupons are reinvested at the UTM rate...if a broker quotes a YTM of 7% for a bond, then that yield will be earned only if each and every coupon is reinvested at a rate of 7%. Clearly, that is unlikely to happen." Surely this will convince you that reinvestment risk is real. You have offered no reliable sources to back up your comments on my edits. I would like to see my edits about yield to maturity and reinvestment risk restored. Re: your "complete rubbish" statement: I don't appreciate the tone of your word choice. I'm quoting widely acknowledged authorities on bonds. We'd all do well to remember Wikipedia Pillar #4: "Wikipedia's editors should treat each other with respect and civility." My qualifications for commenting on this subject are outlined in my user page. Cordially, BuzzWeiser196 (talk) 13:38, 6 December 2021 (UTC)[reply]
Ehrenkater: It's been more than a week and I have received no response from you on my 6 December message (see above). Please note that I believe my edits about yield to maturity and reinvestment risk should be restored. BuzzWeiser196 (talk) 12:49, 14 December 2021 (UTC)[reply]

OK, here is my response.

1 I agree that some investors (such as the categories you mention) do not have precise matching targets. The process they use to select bonds is rather vaguer. These kinds of investors therefore do not plan to require the money at any particular date, whether that date is the maturity date of the bond or any other date, and a fortiori they have absolutely no need to plan to reinvest the coupon payments up to the maturity date of the bond. The metric they are likely to use to compare different but similar bonds is the redemption yield, as this is simpler and doesn't require any arbitrary assumptions which are not relevant to their requirements. I would add further that insofar as a mutual fund will do any cash flow planning, it is likely to assume that there will be a steady flow of withdrawals by retail investors, and that the (relatively small) coupon payments will be more than covered by these withdrawals.

2 The statements you quote from your book appear to be factually correct, but they totally beg the question of whether reinvestment of the coupon payments is relevant or not. Does the book say anything about what category of investor they are thinking about, and why they need all the money on the maturity date of the bond?

3 I apologise for any inappropriate tone in my comments. I have no personal grudges, and my sole consideration here is that this is an important article and it is a shame if any user who is trying to learn about the subject is confused by false and irrelevant statements.

4 While I'm here: I was thinking about reorganising the list of types of bond to group them into categories, e.g. by type of issuer, by investment term etc. I think this would add to clarity. Do you have any objection to this?

Kind regards---Ehrenkater (talk) 13:16, 14 December 2021 (UTC)[reply]

Ehrenkater: 1) Fabozzi and Thau do not specify what category of investor they're talking about. But that doesn't matter, because the point they make holds true for all investors: the actual return earned by the investor is likely to differ from the the yield to maturity or redemption yield (they're the same thing; I'll go into that later) quoted at the time of purchase unless certain conditions are met: that you hold the bond to maturity; that the coupons are reinvested (rather than spent); that coupons are reinvested at the YTM rate. If a broker quotes a YTM of 7% for a bond at the time of purchase, then that yield will be earned over the life of the investment only if each and every coupon is reinvested at a rate of 7%. Clearly, that is unlikely to happen, and that is why it deserves to be in this article. Bond investors need to realize this, so that they don't enter into the investment assuming that over the life of the investment they're going to get an actual earned return equal to YTM or redemption yield. I want to stress that Fabozzi and Thau are respected finance scholars. Since they saw fit to include this cautionary statement in their books, clearly it belongs in this article as well.
2) Yield to maturity and redemption yield are two different names for the same thing. I didn't realize that when we began this debate, but it's clear from the formula you cite, and from these reliable sources: a)Financial Analysts Journal: https://www.jstor.org/stable/4478054 b) Moneyweek: https://moneyweek.com/glossary/redemption-yield c) IG (UK trading company): https://www.ig.com/uk/investments/support/glossary-investment-terms/redemption-yield-definition 3) I don't have any objection to idea for reorganizing the list as you describe. 4) I still want my original language on yield to maturity/redemption yield reinstated. I've done everything I can to explain why. Cordially, BuzzWeiser196 (talk) 15:05, 14 December 2021 (UTC)[reply]
Ehrenkater: At the risk of tiring you, I want to return to your comment: "The statements you quote from your book appear to be factually correct, but they totally beg the question of whether reinvestment of the coupon payments is relevant or not." My rebuttal to that is that reinvestment is relevant to a discussion of yield to maturity because it is one of the conditions that must be met in order for the total return actually earned by the investor to equal the yield to maturity quoted at the time of purchase. Reliable sources are as follows. 1)"Many investors believe the YTM (yield to maturity) is a prediction of what they will actually earn. That is not the case. The actual return is likely to differ from the YTM, perhaps considerably, because the YTM will be realized only under certain conditions." Those conditions include "that the coupons are reinvested rather than spent," and "that coupons are reinvested at the YTM rate." (Thau, Annette. The Bond Book. Second edition. McGraw Hill, New York. 2001. ISBN 0-07-135862-5. p. 58-59.) 2) "...the yield to maturity is a promised yield. At the time of purchase an investor is promised a yield, as measured by the yield to maturity, if both of the following conditions are satisfied: 1. The bond is held to maturity. 2. All coupon interest payments are reinvested at the yield to maturity." (Fabozzi, Frank J. Bond Markets, Analysis and Strategies. 3rd edition. Prentice-Hall, New Jersey. 1996. ISBN 0-13-33-91-51-5. p. 44. 3.)"Our analytical models typically focused on the long-term benefits of holding one type of bond versus another...In order to make fair comparisons, we had to assume that cash receipts were reinvested at a common set of hypothetical interest rates. We soon began to notice that the return from a given bond investment depended critically on the assumption of a common reinvestment opportunity and on the choice of that reinvestment rate. The finding greatly surprised many of the bond veterans." (Homer, Sidney and Liebowitz, Martin. Inside The Yield Book. Third edition. Wiley, New Jersey. 2013. p. 117.) I could cite more sources. This is accepted thinking in the academic community. I well recall how our finance professors at university drilled this very point into us at both the undergraduate and graduate levels. If you're still unconvinced, all I can suggest is that you get some finance textbooks and read up on it for yourself. Cordially, BuzzWeiser196 (talk) 15:47, 15 December 2021 (UTC)[reply]
We still seem to be at cross purposes here. I agree that in order for the investor to receive the stated yield on the whole of his investment, up to the maturity date your conditions would have to be satisfied. But as I have already explained, that is an artificial target which does not reflect the reality of the situation. Therefore no "cautionary statement" is needed. If the investor plans his cash flows to aim for the asset proceeds to match the liability outgo, then there is no need to reinvest the coupon payments. I can't put it more clearly than that, and I do not propose to keep repeating it. If (as is usually the case) this matching is not perfect, then there will at some point be a need for some investment or disinvestment, but the amounts and timing involved will not be equal to those of the coupons.
I note that you are now defining "yield to maturity" as just another name for "redemption yield", and thus you accept that it does not depend on any assumptions on reinvestment yield. I'm happy with that, and thus the article should not imply that they are two different things.
Thanks for confirming that you have no objection to reorganising the list as you described. I hope to do this over a relatively short period of time, but during that period it will be "work in progress".
Kind regards ---Ehrenkater (talk) 11:05, 18 December 2021 (UTC)[reply]
Ehrenkater: Would you be open to working with me to draft some language that expresses both points of view? The basic message would be that the total return actually realized by the investor is likely to differ from the YTM quoted at time of purchase; the YTM quoted at time of purchase will be realized only under certain conditions (list them, with citations to reliable sources); however, any such difference may not be relevant for investors who follow an asset/liability matching approach." This would be a win-win for both of us. It's one of the approaches recommended by Wikipedia:Dispute resolution guidelines in cases like this. Cordially, BuzzWeiser196 (talk) 13:06, 19 December 2021 (UTC)[reply]
As you'll see from my list of contributions, I've not been on here since 18 December, as I've been fully occupied in the real world. That does not reflect the progress of this discussion in any way. I'm reluctant to spend much more time on this article, but you are welcome to draft some language along the lines you mention, and to incorporate that language into the article without needing to consult me. Happy New Year to you!---Ehrenkater (talk) 12:17, 2 January 2022 (UTC)[reply]
Ehrenkater: OK. I'll move forward with this. Cordially, BuzzWeiser196 (talk) 14:18, 6 January 2022 (UTC)[reply]
Ehrenkater: I've made the changes we discussed during Jan. 2-6. Cordially, BuzzWeiser196 (talk) 22:58, 25 January 2022 (UTC)[reply]

history?

[edit]

When were bonds first utilized as a financial instrument? Michael Ten (talk) 07:35, 26 February 2022 (UTC)[reply]

Split proposal

[edit]

I propose splitting the list of foreign currency bonds into its own article. It takes up quite a bit of space in the article which prevents us from describing bonds in a summary style and is somewhat out of scope due to its detail. A. C. SantacruzPlease ping me! 15:36, 30 March 2022 (UTC)[reply]